Wynnewood, PA
1201 Andover Road
Wynnewood PA 19096
Phone: (610) 555-1212
Email: adam@grayoakroofing.com
Get Directions
Proudly serving the Main Line and the broader Montgomery, Delaware, Chester counties.
Gutter Installation & Replacement
Elevate your home’s exterior with expertly installed siding from Gray Oak Siding, built for lasting protection and beauty you can trust.
Protect Your Home From the Ground Up
Water is the single most damaging force working against your home — and your gutters are its first line of defense. A properly designed and installed gutter system quietly moves thousands of gallons of water away from your foundation, your fascia, and your walls every year. A failing one lets that water find its own path, and it rarely goes somewhere harmless.
At Gray Oak Roofing & Exteriors, we install and replace complete gutter systems for homeowners across Montgomery, Delaware, and Chester Counties. Every installation is sized and pitched for your specific home, fabricated on-site for a seamless fit, and completed with the same attention to detail we bring to every part of your exterior.
What We Offer
New Installation & Full Replacement
Whether you’re replacing a failing system or starting fresh, we handle the complete installation — from product selection through downspout termination. We assess your roofline, drainage patterns, and foundation grade before recommending a single product. Every system we install is designed for your home, not templated from a standard spec.
Gutter Cleaning
Regular cleaning is the most effective step you can take to extend the life of your gutter system. We clear debris from gutters and flush downspouts completely, and we flag any performance or structural issues we observe so you have a full picture of your system’s condition after every visit.
Downspout Installation & Rerouting
Where your water goes after it leaves the gutter matters as much as the gutter itself. We install, reposition, and extend downspouts to discharge water well clear of your foundation — and on homes where existing downspouts terminate too close to the house, we reroute them to a more effective location.
Gutter Guard Installation
For homes surrounded by the mature oaks, maples, and sycamores common throughout the Philadelphia suburbs, a quality micro-mesh gutter guard system meaningfully reduces how often your gutters need cleaning. We only install products we’re confident will perform — there are a lot of poor systems on the market and we won’t put one on your home.
Why Gutters Matter in This Region
The Philadelphia suburbs experience some of the most varied weather in the Northeast — heavy spring rain, summer thunderstorms, and winters that cycle through freeze and thaw repeatedly. Gutters that aren’t properly sized, correctly pitched, or regularly maintained become a contributing factor in ice dam formation at the eaves, moisture intrusion at the foundation, and rot at the fascia and soffit. These are among the most common and most preventable problems we see on homes throughout our service area — from the older colonials and Tudors of Havertown, Ardmore, and Merion Station to the newer builds in Wayne, Newtown Square, and West Chester.
Getting the drainage right starts at the gutter. We take that seriously on every job.
The Gray Oak Standard
A gutter system is only as good as the care behind it — the slope calculation, the hanger placement, the downspout sizing, the final check before we leave your property. These aren’t details we delegate or rush through. They’re the difference between a system that performs for decades and one that fails quietly while you’re not looking.
Every gutter project is managed personally from estimate to completion — one contact, one standard, start to finish. We select materials we stand behind, install them the way they’re meant to be installed, and treat your home with the same standard we’d expect for our own. When the work is done you’ll know exactly what was done and why — and you’ll have a direct line back to us if you ever need it.
Gutter Profiles
K-Style
The most widely installed residential gutter profile across the Philadelphia suburbs. The flat back and decorative ogee front integrates cleanly with modern and traditional fascia, and the angular shape moves significantly more water than a round profile of the same width. Available in 5-inch and 6-inch widths, fabricated seamless on-site. The practical choice for most homes in our service area.
Half-Round
The historically correct profile for older and architecturally significant homes. Common on Victorian, colonial, and Tudor-style properties throughout the Main Line — where it’s both the right aesthetic and the right functional choice. The smooth curved interior resists corrosion and debris buildup more effectively than a flat-bottomed profile. Available in aluminum and copper, in 5-inch and 6-inch widths.
Seamless vs. Sectional
Seamless gutters are formed on-site from a continuous coil of aluminum, creating a single uninterrupted run from end cap to end cap with connections only at the corners and downspout outlets. Seams are the primary failure point in any gutter system — they separate, they leak, and they collect debris. Eliminating them removes the most common source of long-term gutter problems. All of our aluminum K-style installations are seamless by default. Sectional gutters are available for specific repair applications but we don’t recommend them for whole-home replacement.
Gutter Materials
Aluminum
The standard material for residential gutters and the right choice for most homes. Lightweight, rust-resistant, available in a full range of factory-applied colors, and significantly more durable than the galvanized steel systems it replaced. We use heavy-gauge aluminum on all installations — lighter gauges oil-can, dent easily, and don’t hold their pitch over time. Properly installed aluminum gutters in our climate last 20 to 30 years.
Copper
The premium specification for gutters — and a legitimate choice for homeowners who want a system that will outlast the roof itself. Copper develops a natural patina over time that complements stone facades, slate roofs, and the character of older homes in a way no painted aluminum can match. We install copper in both K-style and half-round profiles. Typically specified on slate roofing projects, historic restorations, and high-end installations where longevity and aesthetics are the primary criteria. A properly installed copper system can last 50 years or more.
What We Don't Install — and Why
Stainless steel gutters are occasionally marketed as a premium alternative to aluminum or copper. In practice, they offer no meaningful performance advantage for residential applications in our region, cost significantly more than aluminum, and are difficult to source in the profiles and colors appropriate for the homes we work on. The added expense doesn’t translate to added value for the homeowner.
PVC and vinyl gutters are common at the big-box level and have their place on low-slope applications and outbuildings. For a primary residential gutter system in the Philadelphia suburbs, they’re not a material we recommend or install. Vinyl becomes brittle in repeated freeze-thaw cycles, sags under debris and ice load, and typically begins to fail well before the 15-year mark. The cost savings at installation don’t hold up against the replacement timeline.
Get Started Today
As a local roofing company, we’re here to help you protect what matters most, your home.
Contact Us
Wynnewood, PA
Phone: (610) 995-6260
Email: adam@grayoakroofing.com
Signs Your Gutters Need Attention
- Water spills over the front of your gutters during or after rainfall
- Gutters are visibly pulling away from the fascia or sagging between hangers
- Water staining, rot, or peeling paint on your fascia or soffit boards
- Basement or crawl space moisture after heavy rain
- Visible rust staining, holes, or corrosion on existing gutters
- Downspouts discharge water directly against the foundation
- Ice dam damage last winter
- Your home is more than 20 years old and the gutters have never been replaced
What to Expect
- Inspection & Estimate — We visit your home, evaluate your existing system or roofline, assess drainage patterns and downspout placement, and provide a written estimate.
- Product Selection — We walk you through the profile, material, and color options that make sense for your home.
- Scheduling — We commit to a date and communicate clearly throughout. One point of contact throughout.
- Scheduling — We commit to a date and communicate clearly throughout. One point of contact throughout.
- Installation — Seamless gutters formed on-site to your exact dimensions, installed with proper pitch, hanger spacing, and correctly terminated downspouts.
- Final Walkthrough — We review the completed work with you and address any questions before we consider the job done.
- Follow-Up — Direct line back to the person who managed your job if anything comes up after completion.
How often should gutters be cleaned in the Philadelphia suburbs?
Twice a year is the baseline for most homes — late spring after trees finish seeding and late fall after the leaves drop. Homes with heavy oak or maple coverage may benefit from a third cleaning in midsummer. Clogged gutters are the leading cause of overflow and fascia damage, and a cleaning costs a fraction of what a blocked system can cause over time.
What size gutters does my home need?
Most homes in our area perform best with 6-inch K-style gutters. The larger profile moves meaningfully more water than a 5-inch — an important factor given the heavy rainfall events common in the Philadelphia region — and handles the debris load from mature trees without backing up as quickly. We size every system based on your specific roof’s drainage area and pitch rather than defaulting to a standard spec, but 6-inch is our typical recommendation for whole-home replacement.
Do gutter guards actually work?
It depends entirely on the product. There are many low-quality systems on the market that cause more problems than they solve — debris gets underneath them, they retain moisture against the fascia, and they give homeowners false confidence that no maintenance is needed. A quality micro-mesh system from a proven manufacturer genuinely reduces maintenance frequency and prevents most debris from entering the gutter. We’ll give you a clear assessment of whether a guard system makes sense for your home before recommending one.
Can gutters cause ice dams?
Gutters don’t cause ice dams — but they can make them worse. Ice dams form when heat escaping through the roof deck melts snow at the upper roof, and that meltwater refreezes at the cold eave line. A gutter clogged with debris gives that initial ice a base to anchor and build from. A gutter pulling away from the fascia or holding standing water freezes solid early in winter and accelerates the problem. The root cause of ice dams is heat loss through the roof — that requires an insulation and ventilation solution, not just gutter work. But properly maintained gutters reduce the severity of what happens at the eave.
Should I repair or replace my existing gutters?
It depends on the age and overall condition of the system. A gutter that’s sagging in one section, leaking at a single seam, or has a damaged end cap is a good repair candidate if the rest of the system is sound. A system that’s pulling away from the fascia in multiple locations, heavily corroded, undersized for the home, or more than 20 to 25 years old is typically more cost-effective to replace in full.
How long does a gutter installation take?
Most single-family homes in our area are a one-day project. Larger homes or complex rooflines may require two days. We give you a realistic timeline at the estimate and commit to a completion date before scheduling the work.
What's the difference between aluminum and copper gutters — is copper worth it?
For most homes, heavy-gauge aluminum is the right answer — it performs well, lasts 20 to 30 years with reasonable maintenance, and is available in colors that complement virtually any exterior. Copper makes sense when longevity and aesthetics are the primary drivers — particularly on homes with slate roofing, stone or brick facades, or significant architectural character. A properly installed copper system can last 50 years or more and develops a patina over time that painted aluminum simply can’t replicate. If you’re investing in a slate roof or restoring an older Main Line home, copper gutters are worth the conversation.
How does gutter pitch affect performance?
Gutter pitch — the slight angle toward the downspout that keeps water moving rather than pooling — is one of the installation details that determines whether a gutter system performs or becomes a standing water problem. Too little pitch and water sits in the gutter, accelerating corrosion, encouraging mosquito breeding, and adding ice load in winter. Too much pitch and the gutter becomes visually prominent at the fascia. We calculate pitch precisely on every installation — typically a quarter inch of drop per ten feet of run — and verify it before leaving the job.
Why are my gutters pulling away from the house?
The most common cause is failed or inadequate hanger hardware — the brackets that attach the gutter to the fascia. Hangers installed too far apart, hangers that have corroded and lost their grip, or gutters installed with short screws into deteriorated fascia boards all present this way over time. The weight of debris and ice load accelerates the problem once it starts. In some cases the fascia board itself has rotted behind the gutter, making proper re-attachment impossible without addressing the fascia first. We assess the fascia condition at every gutter installation and flag any boards that need attention before new gutters go up.
What should I do about downspouts that discharge too close to my foundation?
Extending downspouts to discharge well clear of the foundation — typically a minimum of six feet — is one of the most cost-effective steps a homeowner can take to reduce basement moisture and protect foundation integrity. We install downspout extensions, buried drain lines, and splash blocks depending on the site conditions and the amount of water the downspout handles. On homes throughout Havertown, Ardmore, Narberth, and the broader service area where lots are tight and grading doesn’t always favor drainage away from the house, proper downspout termination is a detail that earns its keep many times over.